IEC 60884-1(GB2099.1)插头插座测试标准对应测试仪器

2018-11-13 09:36:41 SC01

IEC 60884-1(GB2099.1)插头插座测试标准对应测试仪器

 

TESTING AND MEASURING EQUIPMENT/ALLOWED SUBCONTRACTING

IEC 60884-1:2002-06, Edition 3.0

 

Plugs and socket-outlets for household and similar purposes -
Part 1: General requirements

 

R=Required by Lab       S=May be subcontracted         3PPS=Three Phase Power Supply required

 

Clause

Measurement/testing

Testing / measuring equipment / material needed/Quipment

Subcontracting

8.8

Test of markings

Water, petroleum spirit

R

9

Checking of dimensions

检查尺寸

Caliper, micrometer, gauges

Caliper, micrometer, plugs and sockets testing gauge

卡钳,千分尺,插头插座量规(12)

R

10

Protection against electrical shock

防触电保护测试

Jointed test finger, unjointed testfinger, electrical indicator,
Figures 9 and 10: Gauges for checking non-accessibility of live parts, through shutters, and of live parts of socket-outlets with increased protection,

Test plug

Jointed test finger,有关节试验指

 unjointed test finger, 直型试验手指 

electrical indicator,电指示器

Figures 9: Probes of 20N 探针20N 

Figures 10: Probes of 1N 探针1N 

R

11.5

Measuring of contact resistance

测量瞬变电阻

AC source, measuring instruments

AC source,电源

R

12.2

Tests on screw terminals

测试螺纹端子

Screw driver and spanner with torque meter, weights,
Figure 11: Arrangement for checking damage to conductors

Figure 11: Arrangement for checking damage to conductors

导线受损程度试验装置

R

12.3

Tests on screwless terminals Weights

测试螺纹端子

Figure 11: Arrangement for checking damage to conductors,
AC source, measuring instruments,
Figure 12: Deflection test apparatus

Figure 11: Arrangement for checking damage to conductors

导线受损程度试验装置

Figure 12: Deflection test apparatus of screwless terminals

无螺纹端子接线弯曲试验装置

R

13.14

Lateral strain of socket-outlets

横向应力测试

Figure 13: Device for checking the resistance to lateral strain

Socket &Plug Pull Strength and Transverse Stress tester

插头与插座拔出力和横向应力试验装置

R

13.23
13.24

Test on membranes

表层测试

Heating cabinet, Freezer 

Heating cabinet, 加热箱   Freezer    冷藏箱

R

14.2

Test of non-solid pins

插销测试

Figure 14: Device for testing of non-solid pins

Figure 14: Device for testing of non-solid pins 100N

插销牢固程度试验装置

R

14.23.1

Temperature rise test on plugs of plug-in equipments 

温升测试(模拟使用状态,供电压温升)

AC source, measuring instruments, temperature measuring device

Temperature rise testing on plugs of plug-in equipments

插头插座温升测试仪

R

14.23.2

Torque test on plugs of plug-in-equipment

插头扭矩测试

Apparatus for the torque test

Apparatus for the torque test on plug

插头扭矩测试

R

16.1

Ageing test 老化测试

Heating cabinet, humidity chamber,

Heating cabinet, 烘箱  humidity chamber恒温恒湿箱

R

16.2

Ingress of water 进水测试

Test devices according to IEC 60529

IPX1-6 tester  IPX1-6测试装置
Figure 15: Test wall in accordance with the requirements of 16.2.1

Test wall  实验壁

R

16.3

Humidity treatment 潮湿处理

Humidity chamber 

Humidity chamber  潮湿箱

R

17.1

Insulation resistance 绝缘测试

Insulation test equipment

Insulation test equipment 绝缘电阻测试仪

R

17.2

Electric strength 电气强度

High voltage test equipment

High voltage test equipment 高压测试仪

R

19

Temperature rise

温升测试(模拟极限状态,供电流温升)

AC source, measuring instruments, temperature measuring device, test block for flush-mounted accessories

Temperature rise testing on plugs of plug-in equipments

插头插座温升测试仪

R

20
21

Breaking capacity  分断容量
Normal operation   常态操作

Figure 16: Apparatus for breaking capacity and normal operation,
AC source, adjustable load (resistors and inductors), measuring instruments,
Figure 9: Gauge for checking non-accessibility of live parts, through shutters, after normal operation test,
Figure 10: Gauge for checking non-accessibility of live parts, through shutters, and of live parts of socket-outlets with increased protection

Figure 16: Apparatus for breaking capacity and normal operation test

插头插座开关寿命/分断容量测试仪

Figures 9: Probes of 20N 探针20N

Figures 10: Probes of 1N 探针1N 

R

3PPS

22.1

Verification of the maximum withdrawal force

验证zui大拔出力

Figure 18: Apparatus for checking the withdrawal force, test-plug

Socket &Plug Pull Strength and Transverse Stress tester

插头与插座拔出力和横向应力试验装置

R

22.2

Verification of the minimum withdrawal force

验证zui小拔出力

Figure 19: Gauge for the verification of the minimum withdrawal force

Socket &Plug Pull Strength and Transverse Stress tester

插头与插座拔出力和横向应力试验装置

R

23.2

Test of the cord retention

绳索保持力测试

Figure 20: Apparatus for testing the cord retention,
Apparatus for the torque test

Apparatus for cord retention testing 绳索保持力试验装置

R

23.4

Flexing test 曲绕性测试

Figure 21: Apparatus for flexing test

Apparatus for flexing test  插头电源线弯曲试验机

R

24.1

Impact test 冲击测试

Figures 22, 23, 24, 25 and 26: Impact-test apparatus

Pendulum impact test apparatus  摆捶冲击试验装置

R

24.2

Tumbling barrel test 滚筒跌落测试

Tumbling barrel according to IEC 60068-2-32

Tumbling barrel test machine滚筒跌落试验装置

R

24.3

Test on ordinary surface-type socket-outlets

测试明装式插座

Cylinder of rigid steel sheet,
flat steel sheet

Apparatus test on ordinary surface-type socket-outlets

明装式插座钢板园柱体试验装置

R

24.4

Impact test at low temperature低温冲击测试(插头)

Figure 27: Apparatus for impact test at low temperature

Apparatus for impact test at low temperature 低温冲击试验装置

R

10.1
24.5

Impact test at low temperature低温冲击测试

Figure 38: Arrangement for compression test

Apparatus for compression test 插头压缩试验装置

R

24.6

Test on screwed glands

扭力测试

Metal rods,
test-spanner with torque meter

Torque 扭力计

R

24.7

Abrasion test

磨损测试

Figure 28: Apparatus for abrasion test on insulating sleeves of plug pins

Apparatus for abrasion test on insulating sleeves of plug pins

插头磨损测试装置

R

24.8

Test on shutters

保护门测试

Test-pin, electrical indicator

Apparatus Test-pin test on shutters 插座保护门试验装置

R

24.9

Test on multiple portable socket-outlets

多位移动式插座测试

Figure 29: Arrangement for mechanical strength test on multiple portable socket-outlets

Arrangement for mechanical strength test on multiple portable socket-outlets   多位移动式插座机械强度试验装置

R

24.10

Test of the fixing of the pins

插销牢固测试

Figure 30: Example for test arrangement to verify the fixation of pins in the body of the plug

Apparatus for test arrangement to verify the fixation of pins in the body of the plug 插销在插头上牢固程度检查装置

R

24.11
24.12
24.13

Test on portable socket-outlets with suspension means

移动式插座隔层测试

Cylindrical steel rod

Apparatuses test on portable socket-outlets with suspension

移动式插座隔层试验装置

R

24.14
up to
24.18

Removal of covers or cover-plates Weights

移动盖或盖板测试

Figure 31: Arrangement for test on covers or cover-plates,(测试方法)
Figure 32: Gauge for the verification of the outline of covers or coverplates,
Figure 35: Gauge for verification of grooves, holes and reverse tapers

Gauge for the verification of the outline of covers or coverplates,

验证盖或盖板轮廓线的量规
Gauge for verification of grooves, holes and reverse tapers

验证沟槽,孔及反向锲销的量规

R

25

Resistance to heat

阻抗热测试

Heating cabinet, 加热箱

Figure 37: Ball pressure test apparatus 球压测试装置
Figure 38: Apparatus for compression test for the verification of resistance to heat

Apparatus for compression test 插头压缩试验装置

R

26

Screws, current carrying parts and connections 扭力测试

Screw-driver and spanner with torque meter

Screw-driver and spanner with torque meter 扭力螺丝刀

R

27

Creepage distances, clearances

爬间距离量规

Caliper,
tolerances gauges

Creepage Gauge 爬间距离电气间隙量规

R

28.1.1

Glow-wire test 灼热丝测试

Test apparatus according to IEC 60695-2-10

Glow-wire tester灼热丝测试仪

R

28.1.2

Test of the resistance to heat of pins with insulating sleeves 测试插销保护管

Figure 40: Apparatus for testing resistance to abnormal heat of insulating sleeves of plug pins

Apparatus for testing resistance to abnormal heat of insulating sleeves of plug pins插销保护管试验装置

R

28.2

Resistance to tracking 漏电起痕测试

Test apparatus according to IEC 60112

Tracking tester 漏电起痕测试装置

R

29

Resistance to rusting 生锈测试

Chemicals,
humidity cabinet, 
潮湿箱
heating cabinet    烘箱

R

30.1

Pressure test at high temperature

高温下压力测试

Figure 41: Apparatus for pressure test at high temperature,
Heating cabinet

Apparatus for pressure test at high temperature高温下插销压力装置

R

30.2

Static damp heat test

静态潮湿测试

Climatic chamber according to IEC 60068-2-30

恒温恒湿箱

R

30.3

Test at low temperature

低温测试

Freezer 冷藏箱

R

30.4

Impact test at low temperature

低温冲击测试(插销)

Figure 42: Impact test apparatus on pins provided with insulating sleeves

Apparatus for impact test at low temperature 低温冲击试验装置

R

 

广州世测仪器设备有限公司致力于各类量规检具及相关安规测试设备的研发、生产和销售。公司以强大的研发能力、优质的产品品质、完善的售后服务赢得了市场的认同,是国内量规检具行业的领跑者,旗下的“广州世测品牌已逐渐成为量规检具行业的领先品牌。

广州世测作为专业的安规设备生产厂家,所设计制作的量规和器具更注重尺寸精度的把握和测试的可操作性。我司量规采用防锈能力强的高硬质合金制造,且加工成型后再经过高温热处理和精磨加工,并进行QPQ氮化处理,从而保证量规耐磨损,寿命长,精度高。

 

广州世测专业生产灯头灯座量规,欢迎来电洽谈: 李小姐18902247309 在线订购‖E27灯头量规E14灯头量规E26灯头量规E40灯头量规E39灯头量规E12灯头量规E27灯座量规E14灯座量规E26灯座量规E40灯座量规E39灯座量规G9灯座量规等量规。

 

广州世测仪器设备有限公司
联系人:李小姐 
电话:020-31068736-802  
传真:020-31068273
手机:18902247309
QQ2682354426

本文来自: 广州世测仪器设备有限公司官网(http://www.shice17.com)

 

首页
产品
电话
联系